SKYRC FuriaX Supa Combo 60A ESC and 3650 3600KV Brushless Motor 1/10

The SkyRC FuriaX Supa Combo pairs the FuriaX Supa 60A brushless ESC with the FuriaX Supa 3650 sensorless brushless motor to form a matched 1/10 scale brushless system. It is aimed at drivers upgrading from brushed systems or basic RTR electronics in buggies, touring cars, short course trucks and drift chassis who want a reliable brushless combo without a complicated setup.

FuriaX Supa 60A Brushless ESC

The FuriaX Supa 60A ESC is the control side of the combo. It is rated at 60A continuous and up to 360A burst, and supports both sensored and sensorless brushless motors, though the included motor is sensorless. It is intended for 1/10 touring cars, buggies and short course trucks on 2–3S LiPo or 6–9S NiMH packs, with a compact footprint (about 48×38×38.5mm including fan) and a weight of roughly 100g so it will not upset the handling of most chassis.

Programming is done through SKYRC's RC Gears app on your phone, so you do not need a separate program box. From there you can set running mode (forward/brake, forward/brake/reverse, forward/reverse), drag brake, punch, maximum forward and reverse power, throttle neutral range, LiPo cut-off voltage, BEC output (6.0V or 7.4V), thermal cut-off level and motor pole setting. Cooling is handled by the integrated heatsink and fan, with airflow being the main requirement during installation.

Specifications

·       Current rating: 60A continuous / 360A burst

·       Battery support: 2–3S LiPo or 6–9 cell NiMH

·       Motor support: sensored or sensorless brushless motors for 1/10 applications

·       Built-in BEC: selectable 6.0V or 7.4V for receivers and servos

·       Configurable running mode, punch, drag brake, brake strength and reverse strength

·       Adjustable LiPo cut-off, thermal protection and motor pole count

·       Protection functions for low voltage, overheating and motor lock/stall conditions

·       Approx. size and weight: 48×38×38.5mm with fan, about 100g

The FuriaX Supa 3650 is a 36×50mm 4-pole, 12-slot sensorless brushless motor built for 1/10 scale vehicles. Compared to a typical 2-pole 540-size motor, the 4-pole design produces more torque and smoother power delivery, which helps with controlled launches, steadier climbs and better throttle resolution on both dirt and pavement. Depending on the KV version, it is suitable for mixed-use buggies and trucks on 2S, or for higher-speed on-road setups on 2–3S.

Internally, the motor uses 0.2mm stator laminations, a 6061-T6 aluminum can, high-purity copper windings rated for high temperatures and sintered neodymium magnets rated to around 200°C. Pre-soldered 4.0mm gold-plated bullet connectors and color-coded ABC phase wires simplify wiring. The rotor is removable, which makes cleaning, bearing checks and any performance tuning more straightforward. It is designed to cope with dust and splashes encountered in normal off-road and car-park running, rather than being a fragile race-only part.

Specifications

·       Size: approx. 36mm diameter × 50mm length (3650 format)

·       Design: 4-pole, 12-slot brushless sensorless

·       KV: 3600KV

·       Battery rating (motor): up to 1–3S LiPo; the combo as a whole is used on 2–3S LiPo as limited by the ESC

·       Construction: 0.2mm stator laminations, 6061-T6 can, high-temp copper windings and neodymium magnets

·       Connectors: factory-installed 4.0mm gold bullets with ABC phase wiring

·       Maintenance: removable rotor for easier cleaning and service

·       Approximate weight: around 150g depending on KV version

·       Typical applications and compatibility

Combo Listing

·       This combo is aimed at 1/10 hobby-grade RC cars where a driver wants a sensible brushless upgrade or replacement system. Typical use includes 2WD and 4WD buggies, touring cars, drift builds and short course trucks. 

·       Matched 1/10 brushless combo: FuriaX Supa 60A ESC + FuriaX Supa 3650 4-pole motor

·       Designed for 2–3S LiPo or 6–9 cell NiMH packs in 1/10 cars and trucks

·       App-based ESC setup via smartphone (RC Gears app), no separate programmer needed

·       Switchable 6.0V / 7.4V BEC for standard and high-voltage steering servos

·       Built-in low-voltage, over-temperature and motor-lock protection

·       36×50mm 4-pole, 12-slot motor with high-temp windings and removable rotor

·       Pre-soldered 4mm gold connectors and ABC phase wiring for quick installation