Welcome to Hobby Square online store! Please email sales@hobbysquare.com.sg for enquiry.

Brushed ESC Speed Controller for RC Car Truck Boat (with T-Plug)

Hobby Square Singapore

Regular price $18.00


  • This 320A 2-Way Brushed ESC is an upgrade spare part for RC car, RC crawler, RC trailer, RC boat.
  • Automatically find the neutral point, No throttle calibration required.
  • 1.5 kHz High-frequency drive system that makes the motor works smoothly.
  • Working modes: Forward/Brake/ Backward.
  • Multiple protection features: overheating protection, low voltage protection, throttle signal loss protection

How to use:

  1. Connect with receiver, motor, battery correctly.
  2. Turn on the switch of the ESC.
  3. If the transmitter is off, the motor will emit "bi""bi""bi" alarm tone and will stop when transmitter is on.
  4. Push the throttle stick to the neutral point.
  5. Turn on the transmitter, and adjust the throttle trim until the indicator light off which means the neutral position has been confirmed.

Working mode: When the motor is forward rotation, pull back the throttle over the neutral point, the motor braked to a stop. Then you need to pull the throttle to the neutral point before letting the motor move backward.


  • Working Voltage: 4.8v-8.4v(lithium battery 2s), (4-6Ni-MH)
  • Peak Current: forward 320A, Backward 240A
  • Brake Mode
  • BEC: 5V/1A(power for receiver and servo)
  • Weight: 55g
  • Signal Connector: wire length about 20cm
  • Power Connector: T-plug
  • Motor Connector: 4mm banana plug female
  • Dimensions: 3.3cm x 3.3cm x 2.2cm


  • 1 x Brushed ESC Speed Controller