Features
- This 320A 2-Way Brushed ESC is an upgrade spare part for RC car, RC crawler, RC trailer, RC boat.
- Automatically find the neutral point, No throttle calibration required.
- 1.5 kHz High-frequency drive system that makes the motor works smoothly.
- Working modes: Forward/Brake/ Backward.
- Multiple protection features: overheating protection, low voltage protection, throttle signal loss protection
How to use:
- Connect with receiver, motor, battery correctly.
- Turn on the switch of the ESC.
- If the transmitter is off, the motor will emit "bi""bi""bi" alarm tone and will stop when transmitter is on.
- Push the throttle stick to the neutral point.
- Turn on the transmitter, and adjust the throttle trim until the indicator light off which means the neutral position has been confirmed.
Working mode: When the motor is forward rotation, pull back the throttle over the neutral point, the motor braked to a stop. Then you need to pull the throttle to the neutral point before letting the motor move backward.
Specifications
- Working Voltage: 4.8v-8.4v(lithium battery 2s), (4-6Ni-MH)
- Peak Current: forward 320A, Backward 240A
- Brake Mode
- BEC: 5V/1A(power for receiver and servo)
- Weight: 55g
- Signal Connector: wire length about 20cm
- Power Connector: T-plug
- Motor Connector: 4mm banana plug female
- Dimensions: 3.3cm x 3.3cm x 2.2cm
Including
- 1 x Brushed ESC Speed Controller
