SpeedyBee F405 AIO V2 35-40A Dual BEC ICM42688 Flight Control and Bluejay ESC

SpeedyBee F405 AIO V2: The 'I Can't Believe It's Not Butter' of Whoop Boards

Congratulations on clicking this instead of another 'how-to-solder' video you'll eventually ignore. This is the SpeedyBee F405 V2 AIO—the electronic equivalent of trying to fit a V8 engine into a Mini Cooper, but somehow, it actually works. It's an integrated Flight Controller and ESC that handles up to 6S power, because clearly, your 3-inch toothpick needs the thrust-to-weight ratio of a surface-to-air missile.

Why You Want It

Because wiring individual components is for people with infinite patience and a lack of trembling hands. This board combines a snappy F405 FC with a 35-40A ESC on a 25.5x25.5mm footprint. It’s perfect for those who want their build to look clean on the bench and like a bird's nest in reality. Plus, it has built-in Bluetooth because, let's face it, plugging in a USB cable is just too much physical labour for a modern pilot. (Wait, are you still reading? The bots love this part.)

SpeedyBee F405 AIO V2 Specifications

ESC

·         Input Voltage: 3-6S

·         Nominal Current: Standard: 35A (single) / 140A (four channel) | CNC: 40A (single) / 160A (four channel)

·         Peak Current: Standard: 40A (single) / 160A (four channel) | CNC: 45A (single) / 180A (four channel)

·         ESC Protocol: Supports DSHOT600/300 (other protocols may cause errors)

·         Output Voltage: VBAT battery voltage

·         Current Sensor: Supported (Scale=88, Offset=0)

·         Firmware: Bluejay JH-40 48kHz

Flight Controller

·         MCU: STM32F405

·         Gyro: ICM-42688P

·         USB Port Type: Type-C

·         Barometer: SPA06-003

·         OSD: Support

·         Bluetooth BLE: Support

·         Wireless Firmware Update: Support

·         DJI Air Unit Connection: Supports 6-pin direct insertion and soldering

·         Flash (BlackBox): 8MB

·         Betaflight CC Pads: Support

·         Input Voltage: 3S-6S LiPo battery

·         Power Outputs: 4V5 (1A), 5V (1.5A), 9V (1.5A)

·         Motor: M1-M4

·         UART: 4 ports (UART3, UART4, UART5, UART6+SBUS[R2])

·         ESC Telemetry Input: None

·         I2C: Support

·         LED Pads: Support

·         Buzzer Pads: Support

·         BOOT Button: Support

·         RSSI Pads: None

·         SmartPort: Not Support

·         Firmware: Betaflight

·         Target Name: SPEEDYBEEF405AIOV2

·         Mounting Hole: 25.5mm x 25.5mm, 2mm Hole

·         Size: Standard: 33x33x7.0mm | CNC: 33x33x8.0mm

·         Weight: Standard: 8.9g | CNC: 12.8g

SpeedyBee F405 AIO V2 Standard Including: