Hobby Square Home Repair Service Hobby Square Watch Video Hobby Square FB

Get your Latest !

Happymodel Larva X 2-3s Micro Brushless FPV racer Drone

More Views

  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone
  • Happymodel Larva X 2-3s Micro Brushless FPV racer Drone



Price

S$170.00

Features

  • New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
  • Powerful and smoothly
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
  • Camera Angle adjustable
  • VTX power switchable 25mw~200mw
  • Smartaudio ready, change VTX bands, powers, channels via OSD
  • Receiver: Frsky RXSR
  • Diamond VTX Ready
  • Compatible both for 2-3S Lipo/LIHV

Specifications

  • Brand Name: Happymodel
  • Model: Larva X
  • Item Name: 100mm 2-3S 2.5 Inch FPV Racing Drone 
  • Wheelbase: 100mm
  • Size: 88x88x45mm (without propellers)
  • Weight: 50g (without battery)
  • Drone Version: BNF ( With Receiver & Without Battery)

Happymodel EX1103 7000KV Motor

  • Mode: EX1103
  • KV options: KV7000
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len):Φ13.5x16mm
  • Weight:3.7g

Crazybee F4 Pro V3  Flight Controller

  • CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
  • MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000 (SPI connection)
  • Board Size: 28.5x 28.5mm
  • Power Supply: 2-4S battery input (DC 7-17V)
  • Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 70A
  • Current meter scale set to 470
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 10A 4in1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 2-4S LiPo/LiPo HV (7v/17v)
  • Con. Current: 10A
  • Burst Current: 12A (5S)
  • Support BLHeliSuite programmable
  • Factory firmware: F_H_40_REV16_5.HEX
  • Default protocol: DSHOT600

External Frsky RXSR Receiver version

  • Weight: 1.5g
  • Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
  • Operating Voltage Range: 3.5V~10V
  • Operating Current:70mA@5V
  • Firmware Upgradable
  • Compatibility: FrSky X Series modules and radios in D16 mode 
  • Could support Frsky New ACCST Protocol ( Upgrade firmware)

Happymodel Diamond_VTX

  • Output power: 25~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 250mA~510mA(type)
  • Antenna: RG178 antenna
  • U.FL interface
  • Frequency: 5.8GHz 5bands 40 channels
  • With Raceband
  • Smartaudio ready
  • Weight: 3g without antenna
  • Video Output Size: VGA (640x480) 
  • Video Output format: NTSC
  • Record video size : 1280x720 @25FPS
  • TF Card support: Max.32G
  • Interface: JST SH1.0 3pin for Camera
  •                 JST SH1.0 5pin for Connect with F3/F4 Flight controller
  • Compress Format: AVI

Runcam NANO2 FPV Camera

  • Model: Nano 2
  • Image Sensor: 1/3" CMOS
  • Horizontal Resolution: 700TVL
  • Lens: 2.1mm(M8) FOV 155°
  • Signal System: NTSC / PAL
  • S/N Ratio: >50dB
  • Electronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power: DC 3-5.5V
  • Current : 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 3.2g
  • Dimensions: 14x14x16mm ( LxWxH)

Recommend Lipo Battery
( All Version Don't Include)  Recommend 2S 450mAh Lipo /  3S 300mAh/350mAh/ 450mAh Lipo Battery

Including

  • 1X Larva X frame
  • 1X Crazybee F4 V3.0 with external Frsky RXSR receiver
  • 4X 1103 KV7000 motor
  • 4X Micro Avan Rush Propeller 2.5 Inch ( 4 CW & 4 CCW)
  • 1X Runcam Nano2 Camera
  • 1X 5.8G 25-200mW VTX
  • 1X Propeller disassemble tool
  • 1X Screwdriver