Hobby Square Home Repair Service Hobby Square Watch Video Hobby Square FB

Get your Latest !

KDS Flymentor 3D - Restocking in process!

More Views

  • KDS Flymentor 3D - Restocking in process!
  • KDS Flymentor 3D - Restocking in process!




  • New type of sensing process provides reliable geographical positioning, completely independent of the visible horizon.
  •  Particular CCD sensor can catch the ground picture to compare, and prevent helicopter from drifting.
  • Adjust the working status of Flymentor 3D by AUX Channel, switchable gain system provides three different positions: Off, Stabilization and Position-holding mode.
  • Built-in head lock gyro and swashplate mixer.
  • Control the sensitivity and mode of gyro by GEAR Channel.
  • Support helicopters with 3S 120  swashplate, or 3S 140  swashplate,  or 4S 90 swashplate, or 4S 90 +45  swash plate.
  • Attitude stabilization in inverted flight.
  • Set Flymentor 3D  by computer USB adapter.
  • If you use FM/PPM radio equipment, Flymentor 3D will make the ailerons, elevator and tail servo back immediately. The pitch will remain in the final signal position. And Flymentor will switch to position mode automatically. The sensitivity is 70%.


Voltage: 4.8-6.0V

Current: 55mA (under 5V)

Weight: 37G

Temperature: O'C~ +40'C

Under the stabilisation mode and positioning mode, maximum rotate speed allowed: J Aileron and Elevator: ,;2000 / s J Tail turning (if using external gyro): ,;3600 / s