Hobby Square Home Repair Service Hobby Square Watch Video Hobby Square FB     

Get your Latest !

Eachine TX05 0.01/5/25/50/100/250mW Switchable w/ OSD AIO 5.8G 72CH VTX 600TVL NTSC Mini FPV Camera




  • AIO FPV camera, transmitter , atnenna, OSD 4 in one function limit size and weight.
  • Output power 0.01mw/5mw/25mw/25mw/50mw/100mw/250mw, 6 level one key to Switchable.
  • OSD enabled,support video in and video out.
  • Anticollision EVA case.
  • 9 bands 72 channels with Raceband.
  • Power failure memory, remember the frequency channel after powering off.
  • 120 ° FOV horizontal viewing angle of 150 ° DFOV diagonal perspective.
  • 5.8G  Brass antenna to Antirust and get strong signal.
  • Plug and play, designed for DIY.


Overall Brand Name Eachine
Item NO. TX05
Item Name AIO FPV VTX Camera
Size 19.6mm*14mm(L*W)
Weight 4.9g
FPV Camera Output power 0.01/5mW/25mW/50mW/100mW/200mW (switchable)
(Set output power on 0, to avoid frequency interference)
Input Power 3.3-5.5V
Power consumption 540 mA
Sensor 1/3 "CMOS
Camera Resolution 600TVL
Lens M7 10mm Lens
Angle 120 ° FOV horizontal viewing angle 150 ° DFOV diagonal perspective
Mini illumination 1 lux
Format NTSC
Transmitter Support video format NTSC
Output Impedance 50 Ohm
Output signal strength 13±1dbmdBm
Output Power 0.01mW: -20dBm
5mW:       8dBm
25mW:    15dBm
50mW:    17.5dBm
100mW:  21dBm
200mW:  23dBm
Wireless Channel 72CH
Range 400m
Antenna 5.8G Brass Antenna
Working Voltage 3.3-5.5 V
Current 0.01mW: 260-99mA
5mW:      300-140mA
25mW:    370-170mA
50mW:    470-220mA
100mW:  530-255mA
200mW:  800-540mA
Audio carrier NO
Battery 1S Lipo Battery (3.7-4.2V)
Frequency Table                                                                            5.8GHz 9 bands 72 channels
                                                                        with Raceband: 5325-5945 MHZ

Power Level Instruction:
1) 0.01Mw: LED display "1" and blink twice.
2)    5Mw: LED display "2" and blink twice.
3)   25Mw: LED display "3" and blink twice.
4)   50Mw: LED display "4" and blink twice.
5)  100Mw: LED display "5" and blink twice.
6)  250Mw: LED display "6" and blink twice.

Operation Instruction:
1. On the LED display the Letter means BAND, digits means CHs. Digits blink twice quickly means POWER Level.
2. The default power is 0.01Mw. Setting will restore the last band, channel and power level if no opretation act within 5 second.
3. Short press the button to change CH from 1 to 8.
4. Long press the button (about 2s) when letter blink, then short press to change BAND from A to H.
5. Long press the button (about 4s) when digit blink twice quickly, then short press the button to change POWER Level from 1 to 6.


  • 1 x Eachine TX05 Camera
  • 1 x Foam Protection Cover
  • 1 x User Manual